12G SDI to HDMI(MPO optical output) Wall Plate Converter WMC-SD

Ophit’s WMC-SD is an MPO/MTP-type wall plate video signal converter that converts 12G-SDI to HDMI 2.0 TMDS-compatible optical signals, delivering maximum resolution up to 4K (4096 x 2160) @60Hz without signal degradation.

The newly launched wall plate video signal converter connects to the OMP-HM-R (Receiver) via MPO-type optical cable for up to 100m (330ft) of uncompressed data transmission.

Specifically designed to be mounted in a single gang enclosure, the WMC-SD offers high-speed video signal transmission solutions for Medical system or Broadcast, Control system etc.

Feature

•        Supports the HDMI 2.0 standard

•        Supports SDI interface standards from HD-SDI to 12G-SDI

•        Equipped with two LEDs to indicate the status of input and output

•        Equipped with one push button switch to reset the system

•        Transmits converted optical signal using one MPO type optical cable

•        Designed to mount in a single gang sized slot

•         Fiber Cable

MPO/MTP, 8 (or 12)-core, OM3, multi-mode fiber : Polarity A type

•         Input Date Rate

Up to 11.88 Gbps (ST020820-1, 12G-SDI)

•         Output Date Rate

Up to 18 Gbps (HDMI 2.0)

•         Optical Converter

1 x 4 Array 850nm VCSEL, 1 x VCSEL, 1 x PD

•         Input Signal / Connector

1 x SDI via BNC Female Connector

•         Output Signal / Connector

1 x MPO-Type (Optical Female Connector)

•         USB Connector

      1 x Mini USB-B (Female Connector)

•         Video Resolution

      Up to 4K@60Hz

•         Weight

      155g (0.34 lbs)

•         Dimensions (mm)

      70 x 115 x 87mm (W x D x H)

•         Power Supply

      DC +5V to +12V

•         Power Connector

      1 x 3.5mm (0.14”) Pitch 3-Position Terminal

     (JIEKT / JK350R-03P)